The load-bearing capacity of cable bridge is a factor that must be considered in the selection. Now Jinan cable bridge manufacturer will introduce it to you.

1、動荷載是指電纜橋架安裝和維護過程中，施工維修人員的重量。對于輕型電纜橋架，一般不考慮動荷載，即不允許在橋架上站人，如果需要考慮站人，則應將跨距適當縮小。

1. Dynamic load refers to the weight of construction and maintenance personnel in the process of installation and maintenance of cable bridge. For light cable bridges, dynamic loads are generally not considered, that is, people are not allowed to stand on the bridge. If people need to be considered, the span should be reduced appropriately.

2、靜荷載是指敷設在電纜橋架內的電纜種類、根數(shù)、每根的外徑重量/單位長度，pp管按電纜敷設的不同路由分別列表統(tǒng)計。

2. Static load refers to the type, number of cables laid in the cable bridge, weight/unit length of each outer diameter. PP pipe is listed and counted according to different routes of cable laying.

3、附加荷載僅在室外是指冰雪、風和電磁力所形成的荷載，它與安裝場所的地區(qū)自然氣象條件和帶電體的性質有關，設計中應根據(jù)各種條件加以計算。

3. Additional load refers to the load formed by ice, snow, wind and electromagnetic force only outdoors. It is related to the natural meteorological conditions in the installation site and the nature of charged bodies. It should be calculated according to various conditions in the design.

本文來自：濟南電纜橋架，更多的內容請點擊：http://66343.cn，我們將會為您提問的問題提供一個滿意的服務，歡迎您的來電！

This article is from Jinan Cable Bridge. For more information, please click on http://66343.cn. We will provide you with a satisfactory service for your questions. Welcome your call!